Flame Atomic Absorption Spectrophotometer

Main Specification

Wavelength range

190-900nm

Wavelength accuracy

±0.25nm

Resolution

Two spectral lines of Mn at 279.5nm and

279.8nm can be separated with the spectral

bandwidth of 0.2nm and valley-peak energy

ratio less than 30%.

Baseline stability

≤0.004A/30min

Background correction

The D2 lamp background correction

capability at 1A is better than 30 times.

The S-H background correction capability at

1.8A is better than 30 times. (only for

UFX-110B/120B)

Light Source

Lamp turret

6-lamp turret (UFX-110B/120B),

4-lamp turret (UFX-130B)

auto alignment, fully automated scan and

peak-picking.

Lamp current adjustment

Automatic adjustment and display.

Wide pulse current: 0~25mA,

Narrow pulse current: 0~10mA                  

Lamp power supply mode

400Hz square wave pulse

100Hz Narrow square wave pulse + 400Hz

wide square wave pulse (UFX-110B/120B)

Optical System

Monochomator

Single beam, Czerny-Turner design grating

monochromator

Grating

1800 l/mm

Focal length

277mm

Blazed Wavelength

250nm

Spectral Bandwidth

0.1nm, 0.2nm, 0.4nm, 1.2nm automatic

change.

Flame Atomizer

Burner

10cm single slot all-titanium burner    

Spray chamber

Corrosion resistant all-plastic spray chamber.

Nebulizer

High efficiency glass nebulizer with metal

sleeve, sucking up rate: 6-7mL/min

Emission burner

Provided with UFX-110B/120B

Detection and Data Processing System

Detector

R928 Photomultiplier with high sensitivity and

wide spectral range.

Software

Windows operating system

Analytical method

Working curve auto-fitting; standard addition

method; automatic sensitivity correction; automatic calculation of concentration and ontent.

Repeat times

Maximum 20 times of repeat measurement,

automatic calculation of mean value,

standard deviation and relative standard

deviation.

Multi-task function

Sequential measurement of multi-elements in

one sample

Condition reading

With model function

Result printing

Measurement data and final analytical report

printout, editing with Excel.

Standard RS-232 serial port communication

Characteristic Concentration and

Detection Limit

Normal Air-C2H2 flame

Cu: Characteristic concentration≤0.025mg/L,

Detection limit≤0.006mg/L;

Oxygen-rich Air-C2H2 flame

Ba:  Characteristic concentration ≤ 0.22mg/L

Al:  Characteristic concentration ≤ 0.4mg/L

(for UFX-110B)

Function Expansion

Hydride vapor generator can be connected for hydride analysis.

Dimensions and weight

1020 (L) × 490(W) × 540 (H) mm (main unit), unpacked 80kg